Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have an early 1960 Daimler SP250 (A). I need to strengthen the frame by adding box tubing under the body under the doors and attach them to the outside of the main frame rails. I am looking for drawings, dimenions or pictures. I have looked all over the internet and couldn't find anything. b_close@hotmail.com Mesa, Arizona
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Daimler SP250 frame reinforcement
- Thread starter alfa33047
- Start date
Share this page
I have a b spec SP250 car and recently had to replace one of the boxed beam that runs from the front outrigger to the b post. It is referred to as the sill beam (there are rights and lefts). I bought a replacement from Barry in the UK (a local parts supplier -at the moment forgot his last name). I believe David Manners also has them. Or if you want to cut and re weld the U shaped section at the bottom of the box, my old one is not too bad....you'll spend a little time, but save a little shipping. If you need contact info for Barry PM me or if you want pics or dimensions to make your own, let me know.
DNK
Great Pumpkin
Offline
Those are tough neighborhood reqs that you have to have an SP to live in it
Must be a small neighborhood
