• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Cross reference for hardware

Share this page

G

GilsTR

Jedi Warrior
Country flag
Offline
A number of years back Moss Motors had a TR6 catalog
that had on a reference sheet showing
part numbers and the size of the bolt / nut / washer / screw etc.
While I do not mind buying some hardware from our vendors...
having this handy sheet saved us so much time during the
restoration project. Missing a bolt...you immediately knew the
size....and stopped at the hardware store...found the Grade 8
inventory...and I was on my way.
Somehow in moving the shop from one location to another I
lost this valuable sheet.
Do any of you happen to have a copy of this that you would
be willing to either email or snail mail to me?
Thank you for your consideration.
Gil NoCal
 
Is this the one you were looking for?

It exceeded the limit on the forum. PM me and I can e mail a copy.

David
 
They came through OK. E mail sent.

I have seen the suggestion on another forum that if you post an e mail address you use (at) not @. People get it Bots don't.

David
 
I also like the back of TRF's TR250/TR6 Glove Box Companion. It has them listed as well.

Cheers
Tush
 
You guys are trying to take one facet of the fun out of the restoration. Part of the attraction is using a long bolt to dig through your boxes of old bolts looking for that single bolt you need out of the thousand or so old bolts you have!
 
Back
Top