• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A crank handle for tr-3

Share this page

C

captainde

Member
Offline
I have a 1957 Tr-3 with a tr-4 engine, also it has a tr-4 fan pedestal which is longer than the tr-3 one. I got a shorter tr-3 pedestal and crank bolt today, I have a tr-3A hand crank. I would like to know if it is just the distance of the fat part of the handle that separates the two handles. It looks like the fat part can be moved as it appears to be pressed on to the handle.
Thanks,
captainde
 
Here's some pics of 2 handles which might offer a clue:

crank-short.JPG



crank-long.JPG



But I would think moving the 'fat bit' would be very difficult.

They come up often on eBay... were it me, I would sell the crank you have and buy the crank you need.
 
Back
Top