Correct Bulb Holder for BT7 fuel gauge ?

[Neweys]

I know these are normally included on the harness, but mine no longer has one. I have the bracket to hold on the dial and take the bulb holder for the lamp. But which bulb holder should it be. The hoop on the dial clamp is quite big,suggesting something almost 3/4 inch diameter ?

 

[steveg]

Guessing here, but referring to Moss "Wiring & fittings" page, it may require bulb holder item #10.

 

[stretchit2]

Try calling David Nock at British Car Specialist. If he isn't available talk to John. Not only are they a Moss Distributer, but they have a lot of vintage parts available from their bone yard. John sent me a hand full of used bulb holders for not very much money at all.

https://www.britishcarspecialists.com/

Good luck,

Jeff

 

[TimK]

I know these are normally included on the harness, but mine no longer has one. I have the bracket to hold on the dial and take the bulb holder for the lamp. But which bulb holder should it be. The hoop on the dial clamp is quite big,suggesting something almost 3/4 inch diameter ?

This is my bulb holder (1960 BN7, same as BT7)

 

[Neweys]

Thanks Tim, that's really helpful

S