• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

converting from wire wheels to studs

Share this page

S

SANdMAN_the

Member
Offline
I've read some of the other posts on the conversion process to wire wheels and they all mention swaping out the whole rear end of the car due to clearence issues.

If i'm going the other way, does it make sense that I can just swap the hub and I'll be ok? Has anyone else gone this route?

Thanks,
John
 
The wire wheel axles are 1" narrower, and if you put normal stud hubs on the wire wheel axle, the tires will likely rub on the inside of the fenderwell.
 
I am wondering why you are converting FROM wire wheels. I am thinking of putting them on my Midget but with some of the responses I got, I may not.

Also, have you thought about going to center stub allow wheels. If you go that rout you would not need to change the hubs, just the wheels. In my search for wire wheel information I have seen these and you may want to look at them as an alternative to changing out the axels. Moss Motors is selling a Knockoff Minilite that should work on your current axels.
 
eek...i was hoping the axles would be plug & play :-(

i'm thinking of converting from wire wheels to studs because wire wheels have been very fussy with me. they need to be trued and they've been leaky with me. and i'm concerned that my splines may eventually need replacing (which would mean new wheels too)

i've seen the minilite knockoffs and i do like them...i just don't think $1200 for 4 of them is really justified.

it would be less of a hassle to have normal wheels - no splines, no spokes and i can take them anywhere when i need new tires.

john
 
These are what I have on now,
338dc27d.jpg

We got new tires and mounted them on these:
DSCN2610.jpg


So I need to switch out all the wire wheel stuff , the studs also allow use of a big brake kit and allows you to be able to put normal rostyle wheels with normal tires so the car doesn't have to sit on the slicks.
 
Back
Top