• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Convertible top mountng question.

Share this page

regularman

regularman

Yoda
Country flag
Offline
I welded in a new metal strip around the base where the top fastens at the back and around the corners. I have the plastic pieces to mount back on there and everything, but what I don't know is where to drill the holes. Is there a template or something somehwere? or measurements to take?
 
Not sure I'm following the question. Is this for your '71 Midget? If so, and if your're looking for the measurements and photos for the Tenax (and other) fasteners on the boot deck end of the bonnet, I provided all of that (from my '73 Midget) to another list member (Jim Horton/Midgie) a couple months ago. I'd be happy to forward those to you; if this will help, let the list know we have a solution and PM me your email address.

Ray
 
Back
Top