• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

control head canceller 180 out

Share this page

S

sp53

Yoda
Country flag
Offline
I think I have the parts of the control head canceller 180 out because it does not work. I cannot find my pdf on that and perhaps someone might remember. Does the arm on cast aluminums back piece with the 3 little screws that is basically the back of the unit- point down or up from the straight position. The 50/50 stuff always gets me.
steve
 
The arm on the back plate should point straight down, with the steering wheel in the straight-ahead position.

Wish you'd mentioned that sooner, I just put mine back in last weekend and I could have taken some photos :smile:
 
Thanks much Randall, I am going out and try to just take it loose and see if I can flip around while it is in the car.
steve
 
Good luck with that, Steve. Last time I tried to flip around, my back hurt for a week!
:laugh:
 
Back
Top