• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Coil terminals

Share this page

longbridgehealey

longbridgehealey

Obi Wan
Country flag
Offline
Following my usual pattern of over complicating things, am I correct that coming out of the harness, the white wires goes to the positive terminal on the flamethrower coil, and the black and white to the negative. The car has been converted to negative ground. Then the second pair of white and white and black go to the dizzy. Right?
Thanks, as usual🙂
 
Eager to hear replies to your question.
I have a harness that has the w and w/b connected together on an round terminal connector.
I’m using a Petronix type distributor that has two wires coming out one black one red.
I’m guessing the two sets connect together somehow?
 
Back
Top