Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I read somewhere that someone was driving their TR3 successfully without an external clutch slave return spring? Well I just snapped the end off the spring when installing it. Can the car be driven without said sping if the pedal returns OK without it? Will order a new one in any event.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A Clutch slave "return spring"?
- Thread starter karls59tr
- Start date
Share this page
Offline
If you drive like that, you may have the throwout bearing in contact with the pressure plate (spinning as a result). Not per se damaging, but don't do it if it can be avoided. Any spring that puts pull on the fork will work.
Bob
Bob
I ordered a new spring. Wonder if the throw out bearing contacting the pressure plate would make an audible noise?
Offline
You would only hear it if the bearing was going bad.
Bob
Bob