• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Clutch Question

Share this page

M

MG_Midget_74

Senior Member
Offline
I had a reasonable amount of slave cylinder travel, about 1/2 inch. Took the slave cylinder and pushed the rod into the slave cylinder, the rod moved about an inch and now I have no clutch, I assume there is air in the system.

Do you agree?
 
Yup
 
Did you pump it a few times before you determined that something is wrong? Maybe you just need the fluid to push the cylinder out before you try to fix too much.
Bill
 
Billm said:
Did you pump it a few times before you determined that something is wrong? Maybe you just need the fluid to push the cylinder out before you try to fix too much.
Bill
Click to expand...

Yes, I did, the weird thing is all summer there was some clutch. Just pushing it the rod in and then nothing, but yes, I did pump the clutch.
 
Back
Top