-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Clutch Pilot Bearing
- Thread starter sail
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
I don't believe so. The hole in the stock flywheel is smaller than the bearing od.
But fortunately it's not that hard to R&R the flywheel, once the gearbox is out of the way. I used a big screwdriver & a bolt to jam the flywheel teeth, but a purpose-made tool would probably work better.
But fortunately it's not that hard to R&R the flywheel, once the gearbox is out of the way. I used a big screwdriver & a bolt to jam the flywheel teeth, but a purpose-made tool would probably work better.