• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Clutch MC Rebuild Question

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
I'm changing my 59 bugeye to a dual brake MC and a clutch MC. I'll be buying a new dual brake MC and I have a clutch MC that I removed about 2 years from a 74' Midget - working at the time.

Two Questions:
(1) Should I rebuild the clutch MC as long as it's out of the car?
(2) how much work is it? doesn't seem that bad from what I've read in the archives.

Any tricks or Tips? Any recommendations for vendors for the kit? do any vendors rebuild these?

thanks.........
 
Easy. Just be sure to lightly hone the cylinder. Also, be sure the hole in the clutch pedal isn't elongated.
 
You'll need to dismantle the cylinder first to determine which of the 2 kits you need. Either 1 cup + 1 seal or 2 seals. Check the usual suspects' online catalogues.

Peter C
 
Back
Top