TR6 Clutch Lever Play

[MadRiver]

Howdy all! I'm working on replacing my clutch slave cylinder, and once I removed the existing unit, I noticed that I can move the clutch lever forward and back roughly 1/2" with no effort at all. I would appreciate thoughts about whether this is cause for concern, and if so, what might be causing it.

Thanks in advance!

 

[poolboy]

Sounds normal to me. Moving it to the rear once you feel resistance it should take considerable effort (if by hand) to move it about 5/8 of an inch more to the rear.

 

[mctriumph]

Check for worn X shaft bushes while there ,these make good actuation difficult.
Mad dog