• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 Clutch Lever Play

Share this page

MadRiver

MadRiver

Jedi Knight
Bronze
Country flag
Offline
Howdy all! I'm working on replacing my clutch slave cylinder, and once I removed the existing unit, I noticed that I can move the clutch lever forward and back roughly 1/2" with no effort at all. I would appreciate thoughts about whether this is cause for concern, and if so, what might be causing it.

Thanks in advance!
 
Sounds normal to me. Moving it to the rear once you feel resistance it should take considerable effort (if by hand) to move it about 5/8 of an inch more to the rear.
 
Back
Top