• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Clutch and Ideas<- Idears if from Boston, MA

Share this page

M

MG_Midget_74

Senior Member
Offline
So, this weekend I took the slave cylinder off the transmission. I took an electrical box cover and drilled three holes, two for the mounting bolts, 2.25 inches from each other and another 2 1/8, equi distance from the two mounting holes. The slave cylinder was then mounted to this piece of metal. The system was then bled until it felt like the brake system. It appears to have worked well. And it really did feel like the brake system.
 
can you send a picture? I'm not visualizing it but it sounds helpful
 
I agree, a pic or two would really help in understanding that!!
 
I get the gist of it: dangle the slave under the car, still connected to the master, in a steel box with a "wall" to keep the "puck" from flyin' out and bleed it that way. Negates the need for three extra joints per finger (A.K.A. "Lotus Fingers") to bleed it in-situ.

Me likee! /bcforum/images/%%GRAEMLIN_URL%%/thumbsup.gif
 
DrEntropy said:
I get the gist of it: dangle the slave under the car, still connected to the master, in a steel box with a "wall" to keep the "puck" from flyin' out and bleed it that way. Negates the need for three extra joints per finger (A.K.A. "Lotus Fingers") to bleed it in-situ.

Me likee! /bcforum/images/%%GRAEMLIN_URL%%/thumbsup.gif
Click to expand...

Yes thats correct.
 
Born and raised in New England (Rhode Island). Yes, I thought it was "idear" -- that's where the "r" from "weird" went, or as we'd say it: "weid". /bcforum/images/%%GRAEMLIN_URL%%/grin.gif
 
I always thought that was a Yorkshireman's answer to his missus..."Aye dear!" /bcforum/images/%%GRAEMLIN_URL%%/jester.gif

A good idear(sic) nontheless!!! Thanks for the tip!! /bcforum/images/%%GRAEMLIN_URL%%/thumbsup.gif
 
Back
Top