Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hey all,
I have a question - are there any tricks to installing the choke return spring on the SU carb? I had a sticking jet, and after replacing jets realized my choke return wasn't working on one carb. I've disassembled the choke linkage, replaced the bolt/return lever/springs but having great trouble getting that last choke return spring (one closest to carb body) wound an extra turn with enough tension before slotting it - such a small tight space and fidgety thing. Any recommendations/tricks to doing this? Much obliged.
I have a question - are there any tricks to installing the choke return spring on the SU carb? I had a sticking jet, and after replacing jets realized my choke return wasn't working on one carb. I've disassembled the choke linkage, replaced the bolt/return lever/springs but having great trouble getting that last choke return spring (one closest to carb body) wound an extra turn with enough tension before slotting it - such a small tight space and fidgety thing. Any recommendations/tricks to doing this? Much obliged.