TR4/4A Choke Cable Routing

[TRMark]

I installed HS6's and the later manifold on my originally H6 equipped 63TR4. The later carb has much different choke linkage. Where do I route the cable through the firewall? Can you post up a picture?

 

[charleyf]

I also use the HS6 carbs on my TR4's. I use a double cable for the chokes. I use the grommet directly above the heater hoses. The long cable is to long and I routed it under the heater valve. The short cable barely makes it over the top of the carb and into where it belongs.

 

[KVH]

I'm certain Geo Hahn posted a perfect pic of that routing not long ago.

 

[TRMark]

Thanks guys. Yup,its the grommet above the heater hose. My carb setup uses a single cable, there is a linkage between the carbs. I did find the thread with the pictures I needed.