-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Changing Bearings
- Thread starter Tullamore
- Start date
Share this page
Offline
You "might" be able to do some of the mains. Not so sure about the thrust bearing.
Usually if the bearings are worn the crank is worn also. It's kind of a crap shoot. This sort of repair without reconditioning the crankshaft will likely get you by for a few thousand more miles, but no where near what a reconditioned crank with new bearings would do. Some used car dealers do this just to get by for long enough to sell the car.
D
Usually if the bearings are worn the crank is worn also. It's kind of a crap shoot. This sort of repair without reconditioning the crankshaft will likely get you by for a few thousand more miles, but no where near what a reconditioned crank with new bearings would do. Some used car dealers do this just to get by for long enough to sell the car.
D
sparkydave
Jedi Knight
Offline
Hi Tullamore, I'm not sure if this would apply to older Midgets, but I found this for the 1500s. Having looked at the innards of my 1500 when I replaced the oil pan, it doesn't look too nasty.
https://www.wideopenwest.com/~kottage/tech/1500_bearings.html
https://www.wideopenwest.com/~kottage/tech/1500_bearings.html