• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Changing 5/8 to 3/4 Midget filter adapter nipple?

Share this page

BritcarsUSA

BritcarsUSA

Freshman Member
Offline
My 76 Midget takes a 5/8" hole spin on oil filter. Someone is sending me a replacement 5/8 to 3/4 adapter nipple. This way I can use a lot of over the counter filters The old 5/8 nipple needs to be removed. What is the correct way to do this without destroying the threads if it doesn't want to budge? Are the threads reversed or anything? Thanks!
Jan
 
Hi Jan... I wish I knew. The one in the Spit was installed before I got it. Did the part arrive yet?
 
Hey, Jan...if your Midget is like mine, it has the bolt-on piece that relocates the filter mount up and to the right a bit, to clear the air pump? The nipple on that (part #53, to make sure we're talking about the same thing!) is threaded normally; unscrews to the left. I'm very certain of that, as mine is loose, and usually ends up on the filter when I'm changing 'em. Hope that helps!
SPM-004.gif
 
It sounds like a bit of degreaser and some Loctite on the 5/8 threads may be in order then.
 
An internal pipe wrench should do the job General tool makes a set that has one that should work.
 
Back
Top