• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Carb Spacer

Share this page

OP
G

GeneF

Freshman Member
Country flag
Offline
My 74 TR6 has been neglected for quite a while. I'm rebuilding the carbs in the hopes of getting it started ( one of the throttle plates is stuck shut from old gas )
I was wondering if I should replace the carb spacers while I'm at it. They look OK without taking them off.
Gene
 
Sort by date Sort by votes
If they are tight and not leaking should be OK. Ounce you get it started and fresh gas add Sea Foam to tank from any auto parts outfit. also get some carb cleaner spray can, spray it on the spacers while the car is running ( just a shot ) if RPM changes you have a vac leak
 
Upvote 0 Downvote
Back
Top