• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

GT6 Carb Floats for Stromberg 150 .

Share this page

R

Redoakboo

Jedi Warrior
Offline
I have a friend in my TR club who has a '67 GT6. He is rebuilding the carbs and has found all floats to be bad. Do you know of anyone that might carry these floats? He has not been successful in finding a source.

Dick
 
Compare your friend's float to the picture of the one shown in Randall's link. The early cars had a different float that is NLA. The early floats had a different offset and there was only one float valve actuator "paddle". When one of our car's floats sank I was fortunate and could rob a float out of an extra old carb.

I bought a later float to see if it could be adapted. I modified it to fit but never tried it. The mod involved cutting off one of the float valve actuator paddles and using a piece of tubing on the pivot pin to properly locate the float in the bowl. Again, I tinkered with it but never placed it in service.
 
Back
Top