• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 Carb. Float Chamber Fix

Share this page

T

TR6Dan

Member
Offline
Hello,

I have a '74 TR6 with Stromberg carbs. Is there a fix for the plug and o ring in the float chamber? I replaced both; 1 is ok and the other is leaking; so I ordered a new plug and o ring. Possibly a float chamber that does not have a plug in the bottom?

Thanks,
Dan
 
Yes there are, but a good cleaning of the perimeter of the hole is usually required for a tight seal....and then there's the JB weld option
You could give Joe Curto a call, he may have a plugless float chamber he'd part with.
 
poolboy said:
Yes there are, but a good cleaning of the perimeter of the hole is usually required for a tight seal....and then there's the JB weld option
You could give Joe Curto a call, he may have a plugless float chamber he'd part with.
Click to expand...


Thanks for your response; do you have the contact information for Joe Curto?
 
Back
Top