Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
John Morralee
Senior Member
Offline
Please,what is the correct distance between the bump stop box and the rubber mount on the axle ,which the box contacts, for an unloaded '63 BJ7. thank you in advance . John M.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Bump Stop Box
- Thread starter John Morralee
- Start date
Share this page
John_Progess
Jedi Warrior
Offline
John,
I have a 64 BJ8 phase I which should be the same as your BJ7. By unloaded do you mean the the wheels off the ground supported by the suspension? Have a good day!
John
I have a 64 BJ8 phase I which should be the same as your BJ7. By unloaded do you mean the the wheels off the ground supported by the suspension? Have a good day!
John
OP
John Morralee
Senior Member
Offline
No I meant with the car standing on flat surface with no driver /passenger aboard.
John_Progess
Jedi Warrior
Offline
John,
I was able to get a distance of 3 1/16" on the passanger side. The driver side is blocked by the exhause pipes. I don't know if this is correct but it is what I have. Hope this helps and have a good day!
John
I was able to get a distance of 3 1/16" on the passanger side. The driver side is blocked by the exhause pipes. I don't know if this is correct but it is what I have. Hope this helps and have a good day!
John