• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Bump Stop Box

Share this page

J

John Morralee

Senior Member
Offline
Please,what is the correct distance between the bump stop box and the rubber mount on the axle ,which the box contacts, for an unloaded '63 BJ7. thank you in advance . John M.
 
John,
I have a 64 BJ8 phase I which should be the same as your BJ7. By unloaded do you mean the the wheels off the ground supported by the suspension? Have a good day!

John
 
John,
I was able to get a distance of 3 1/16" on the passanger side. The driver side is blocked by the exhause pipes. I don't know if this is correct but it is what I have. Hope this helps and have a good day!

John
 
Back
Top