• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

bulbs in the speedometer for new wiring loom ?

  • Thread starter Deleted member 14225
  • Start date

Share this page

D

Deleted member 14225

Guest
Guest
Offline
hi

witch bulbs will fit in my new wiring loom ? LLB987 wil not fit help me please :smile:

arnt roger



 
Try asking the folks who sold you the harness. Or just splice in the holders from the old harness.
 
Or go to you local real auto parts store and show them the socket!!
 
The new harnesses I have seen (for about a decade) have used sockets for the "wedge" base bulbs (T10 etc) used on mondern cars. If that is what your new harness came with you should be able to get the bulbs at any local parts store. If your new lamp bases are not that type but need a different screw-base bulb you really only have two choices: 1) contact whoever you bought the loom from and see if they can identify the type of bulb (or maybe even sell them to you), or 2) contact Britishwiring.com and buy the wedge base sockets from them so you can convert your new harness to use the T10 style lamps.
 
Back
Top