• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bulb holder Mk1 3000

Share this page

N

Neweys

Freshman Member
Country flag
Offline
Can anyone tell me the right bulb holders for the illumination of the oil/ fuel gauges ? I have lights to the speedo / rev, but noting on the old loom for these gauges. have bought the new brackets to secure the gauges which include a place for the bulb holder, but where do I get the actual bulb holder from ?
 
Send them an email and ask them your question. They'll let you know what the part number is and the cost. Good luck.
 
Neweys said:
Can anyone tell me the right bulb holders for the illumination of the oil/ fuel gauges ? I have lights to the speedo / rev, but noting on the old loom for these gauges. have bought the new brackets to secure the gauges which include a place for the bulb holder, but where do I get the actual bulb holder from ?
Click to expand...
Assuming that your car is a evolution of my 100/6 1957 Instrument have this bulb inside - E 10 Socket
(NO commercial Interest)
(If you have a NEW/recent harness-- NEW lamps LG4705 can be mounted, but in my opinion this is a wrong choice) NOTE: LED with same E10 socket can be mounted without any modification (I have followed this solution, BUT my car is NEGATIVE Ground wired) Hope this helps



Hover over the image to zoom.
​
[h=1]BULB - INSTRUMENT LIGHTING (SCREW FIT) - LG4690[/h]

[h=5]Your Price: ÂŁ0.50[/h] (ex. VAT)

Part Number: LG4690
Application: BN1-BJ8
Quantity per Vehicle: AR
Alt Ref: GLB280 (170-000)




Qty
 
Back
Top