Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Keith_M
Jedi Knight
Offline
I recently installed the soft top for my bugeye. It looks pretty good, but to get it really tight looking, the forward bar needs to be a little higher than can be achieved with the hinge mechanism in the default configuration (below)
Getting it tight requires that the bottom brace be straight, but it won't stay that way without a wedge. To solve the problem, I fabricated a couple of wedges that fit tightly into the braces and hold the bottom one straight. (below)
It's small change in the configuration, but it makes a big difference in how the top fits. I'm curious as to whether this a common problem or if my bows are somehow not "normal".
Keith
Getting it tight requires that the bottom brace be straight, but it won't stay that way without a wedge. To solve the problem, I fabricated a couple of wedges that fit tightly into the braces and hold the bottom one straight. (below)
It's small change in the configuration, but it makes a big difference in how the top fits. I'm curious as to whether this a common problem or if my bows are somehow not "normal".
Keith
