• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bugeye Rear Wiring Harness Route????

Share this page

Ohiobugeye

Ohiobugeye

Senior Member
Country flag
Offline
I bought a new wiring harness for the BE. When I bought the car 3 years ago it was stripped, just a basic rolling chassis. I have no idea what the location of the REAR harness ( sending unit and rear lights ) would be. I need to find out the route from where it connects at the main harness to the access holes at the rear of the passenger door, behind that area I think I'm ok. I remember when Jack was posting pictures he had one showing some wires taped to the floorboard. Do the wires just lay on the floor under the carpet and side pannels or an I missing a axcess hole someplace? Thanks Don
 
The wires run on the outside of the steel side board down to the rocker where they still run on the outside of the metal to the hole in the rear dog leg.
Up thru the hole and back out again over the rear wheel hump into the boot.
The interior panels cover the exposed harness but be careful when you screw the interior panels on, I have screwed right through the harness.
 
Back
Top