• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Bugeye Nuts & Bolts

Share this page

E

erstearns

Jedi Trainee
Offline
Any one seen a complete list of nut and bolts necessary to assemble a bugeye (excluding internal parts for all components)? Would like to round out my collection of grade 8 to have all necessary to put the old girl back together.
 
Eric,

There are only about 3 different sizes all fine thread I took mine to a hardware company and bought all new pieces. The body parts all use the same bolt. Truly the least expensive part of a rebuild.

Mark
 
Keep looking. I seem to recall that someone on one of the sprite list has a list. Might have been Frank, aka spritenut.

Brian
 
Have never seen one but am still looking.
 
I got this list from one of Frank's posts (I think it was his...) a while back:

Fasteners
- 10-32 pan head 5/8" long
- 1/4 x 28 x 3/4" hex
- 5/16 x 24 x 1" hex
- 3/8 x 24 x 1.25" hex
- SAE flat washers, split washers, and nuts for the above
- Grade 5 is what was original.
- Bolts are usually 3/4" in length
 
Found it at Gerard's Garage a few year's ago Fastener List . I copied the list to an Excel File and used it to go shopping.

Paul
 
apbos said:
Found it at Gerard's Garage a few year's ago Fastener List . I copied the list to an Excel File and used it to go shopping.

Paul
Click to expand...
Hey that's good stuff, I'll be need this as well. Thank you.
 
That list is a good start. I remembered seeing one somewhere. I have the beginning of a good collection but can use it to fill it out. Always hard to stop the reconstruction process to run out and get a missing nut or bolt. Was putting the rear suspension in last night and could not find the original bolts to use on the newly rebuilt shocks and was wondering what size I needed (eventually found them but that got me to thinking about getting an assortment that would cover most uses).

Much thanks for the help! :thumbsup:
 
Back
Top