BT7 thermostat gasket

[Deleted member 21878]

also going thru gaskets today to see hwat i have and don't have. the gasket for the thermostat looks like just a round seal. i am used to seeing ones that come out around the studs. is this normal? Came in a Moss kit. or does someone else make a gasket that covers more?

 

[Deleted member 21878]

never mind found the gasket i was looking for on Moss. not sure how i missed it before.

 

[Bob_Spidell]

There's a thin, circular paper gasket that's supposed to go under the thermostat lip. Usually dissolves in a couple weeks.

 

[Randy Forbes]

There's a thin, circular paper gasket that's supposed to go under the thermostat lip. Usually dissolves in a couple weeks.

...

 

[CaptRandy]

Randy, does anyone make a blanking thermo that is 160 degrees, all I have found are 190.

 

[steveg]

Randy, does anyone make a blanking thermo that is 160 degrees, all I have found are 190.

BCS does

 

[CaptRandy]

Thanks Steve, will order one.

 

[steveg]

Pix in a previous thread:
See:
https://www.britishcarforum.com/bcf/showthread.php?101510-Robertshaw-sleeved-thermostat&highlight=robertshaw+thermostat

scroll down at same link for discussion of using Moss fail-open thermostat with cutaway Moss blanking sleeve.