• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BT-7 Rear View Mirrors

B

Bobbee44

Guest
Guest
Offline
I do not want to drill any holes in my fenders for rear view mirrors. I have seen several photos of big Healeys with mirrors attached to the bottom screws (right and left) of the windscreen posts. Does anyone know if these are available or are they a custom job?


Cheers,

Bob
 
Hey Bob,
Had a pair on my BN6 that I got from Cape International in UK. Use the front large screw hole on your windshield posts and then are tightened up underneath with a nut. Work great, do not interfere with anything and no holes in your wings ! Very nice BT7 !!! website is :www.cape-international.com
Regards,
Mike
 
Hey Bob,
Had a pair on my BN6 that I got from Cape International in UK. Use the front large screw hole on your windshield posts and then are tightened up underneath with a nut. Work great, do not interfere with anything and no holes in your wings ! Very nice BT7 !!! website is :www.cape-international.com
Regards,
Mike

Friends of mine had problems seeing out of the passenger-side mirror, as it's behind the windshield post. Cape sells an extension to address this.
 
Steve and Mike:

Thanks much. I have my order in. Too bad I did not know before today, my wife is in london for the week.

Bob
 
Steve:

That's where I last saw them and that's why today's note.

Thanks again,

Bob
 
Back
Top