• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Brittanicar Rack and Pinion Conversion

Share this page

J

jcsb

Jedi Trainee
Offline
Has anyone here done this conversion? Just wondering what problems you experienced and what parts were retained or modified in the installation?
John
 
They responded to my email with a price. I would just like to know what needs modification and what is you loose. I would imagine you would loose the function of the trafficator and horn since they run through the center of the steering shaft.
John
 
Yeah, I would like to hear from someone who put in the bighealey box. I am going to try and see if I can adjust it some, but right now I've got about 3/4" play or more.
John
 
jcsb said:
Yeah, I would like to hear from someone who put in the bighealey box. I am going to try and see if I can adjust it some, but right now I've got about 3/4" play or more.
John
Click to expand...

Have you jacked up the front of the car and observed whether the play is in the steering, the idler or the tie rod ball joints?
 
IMO the Jule rack and pinion conversion is not even in the same league. Here is a link to his setup, Marty includes everything you need , even a recored radiator. All of his brackets are welded on, nothing will move, it is bullet proof. Several vintage car owners have told me the install looks factory and they just assumed it was an original part. I have this setup in my car which is still maybe six months away from driving. I have driven Marty's BN6 with his rack and pinion, the car is nicely connected to the road.

https://www.jule-enterprises.com/services/rack-and-pinion/
 
Back
Top