Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
vettedog72
Jedi Knight
Offline
Anybody rebuilt the XK150 brake servo? It is actually two parts, the vacuum part and the hydrolic part. If you have rebuilt either, I sure would like to hear your comments.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Brake Servo XK150
- Thread starter vettedog72
- Start date
Share this page
Not done it myself, but there are some good pictures of the assembly here:
https://www.jag-lovers.org/snaps/snap_view.php3?id=1167184588
https://www.jag-lovers.org/snaps/snap_view.php3?id=1167184588
Offline
Done a few of 'em. Only painful part is the spring tension on disassembly/reassembly. Not ~bad~ per-se but if you don't expect it, it'll be a face-full of surprise IYSWIM. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
Have you got a workshop manual for the car? If not, I'd say find one, mebbe e-bay or ask around the nearest Jag owner's club(s). It has an extensive explanation of the assembly process. If you get 'stuck' post the problem and we'll try working thru it. I've a factory book here (on the 6-7/8" "pot") and may be able to scan some of it.
EDIT: You may need to PM me to get my attention: I rarely stick my nose in the Jag forum. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
Have you got a workshop manual for the car? If not, I'd say find one, mebbe e-bay or ask around the nearest Jag owner's club(s). It has an extensive explanation of the assembly process. If you get 'stuck' post the problem and we'll try working thru it. I've a factory book here (on the 6-7/8" "pot") and may be able to scan some of it.
EDIT: You may need to PM me to get my attention: I rarely stick my nose in the Jag forum. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
OP
vettedog72
Jedi Knight
Offline
Thanks for the response. I have ordered a new servo and I am awaiting the delivery. The resto work is on hold now and until I have another opportunity to get back I will accumulate some more identified parts. I found a new servo and a rebuild kit for the old one. The rebuild kit was on eBay but I got out bid so I will just have to be satisfied with a new one. With out any expertise with the insides of the servo, I don't even know what parts would be in a rebuild kit but I did see a PIECE OF ROPE as one of the parts. I will have the old servo in hand when the new one comes in and I hope they are a match. My old servo hydrolic part is not the "bolt at the end of the cylinder" type. Hope the new one is like my old one. The air filter on the thing looks like an old American oil filler breather cap. I am totally unfamilure with this type of brake servo.