• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

brake rubbing

Share this page

nevets

nevets

Jedi Knight
Country flag
Offline
I noticed that my left front wheel felt hot after a drive (none of the others where hot) so I jacked up the car and when spinning the wheel, felt the brake shoe rubbing in spots. I was unable to adjust it so the wheel would spin freely, even with both adjustment nuts fully backed off. In fact there was less rubbing with one of the adjustment nuts tightened few notches. I am guessing that the drum is not concentric with the axis of roatation, or maybe the adjustment mechansim is not working properly, or a combination of factors. My next step is to pull off the drum to have a look. As always suggestions are appreciated.

Thanks!
 
I have had a lot of problems like this with calipers. I suspect the brake cylinders or the hoses. If they are old, replace them.
 
Interesting. I would not have considered the hydraulics. I'm glad I asked. I will investigate the hoses and wheel cylinders. My experience with brake hydraulics is that replacing one part of the system, like a wheel cylinder, leads to problems with the older components. Maybe a complete over haul is in order? Is Apple Hydraulics the best resource for reconditioning wheel cylinders, master cylinder? What about having the drums turned round? Thanks for the feedback!
 
I don't want to steal this topic, but does anyone have experience with stainless steel braided brake hoses? Are they and improvement over the original rubber style? What is a good source?
 
Goodrich (UK?) makes some to fit Healeys, and I've used them on plenty of BMWs.

They certainly solve the issue of the rubber swelling shut (keeping the brakes applied), just be mindful of their routing, taking full bump/full droop and turning range into consideration.
 
Back
Top