• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Brake rotor help

Share this page

C

CoryVan

Freshman Member
Offline
I am hoping someone on this forum may know what British car has this size brake rotor.(see sizes below). Our RF 80 Van Diemen formula ford is said to use a stock british car brake rotor, possibly a Trimuph GT6.The main issue is the height of the “hat” which is much shorter at only ½ inch. Any help in resolving this issue would be greatly appreciated.
Current rotor dimension are
Hat height = .50”
Hat I.D. = 2.62”
Hat dia 5.45”
Worn rotor thickness .31”
Disc dia = 9.75”
Bolt circle = 4 X 3.75
Stud hole = 3/8”
I attach pictures of the rotor.

--------------------
Cory
 

Attachments

  • 260429-FFrotor9.75.JPG
    260429-FFrotor9.75.JPG
    29.7 KB · Views: 132
I don't know what you've got, but Brembo might be able to help:

https://www.brembo.com/ENG/AfterMarketBrakes/Brembo+Catalogues/SearchCars.htm

Lets you enter the relevant dimensions and then identifies what Brembo rotors have the same characteristics. It works on partial data too, so if the full entry turns up nothing you can drop some dimensions and see what might come close.

Alternatively, you can choose the make and model and it will turn up the relevant Brembo disk and will provide the dimensions too. This is for a Spitfire- they didn't have the GT6 one, it seems:

https://www.brembo.com/CatalogoBrembo/Det...mber=08.1581.10

Hope this helps....
 
That rotor doesn't look like it came from a Spitfire or a GT6. The Triumph rotors don't have a 4x3.75 bolt pattern unless this one was custom drilled. Have you tried Pegasus for a replacement?
 
Back
Top