• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series Brake pressure failure switch

Share this page

X

xsteamer

Guest
Guest
Offline
My indicating light for the brake pressure failure switch has never worked since I've had the car. I now have brake fluid leaking at the switch. Has anyone ever plugged the socket where the switch is? If yes, with what size plug?
 
The switch is only $50 at Moss and probably cheaper elsewhere. Not too much to ask for a piece of safety equipment I'd say.
 
Aloha,

Here is link describing how the assembly is supposed to work.

https://www.youtube.com/watch?v=1oI2yrRCUVI

If you have a fluid leak from the electrical switch you probably have a leaking seal in the switch. Moss Motors offers a rebuild kit for the assembly and I'm sure there are other sources also.
 
Thanks Guys, I tried a seal kit awhile ago but it took forever to loosen one break line connection and all I accomplished was to remove paint on the inside fender ao I gave up on that idea.
 
Back
Top