• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGA Brake line recommendations MGA 1500

Share this page

ronzet

ronzet

Jedi Knight
Offline
Good day all,

Just an opinion needed. I am restoring my A to as close to Concourse as possible.... Ergo, original brake lines were either brass (?) or copper (?). My preference is steel tubing... What have you guys done and how many points will I be hit with if I use the steel tubing?? /ubbthreads/images/graemlins/crazy.gif

Thanks
 
I thought they were steel on the A's. I'd say take yer lumps and go with steel anyway, if for nothing but safety's sake.

Just my tuppence worth.
 
/ubbthreads/images/graemlins/iagree.gif
"Use only genuine Bundyweld steel hydraulic tubing. Bundyweld comes in turn (tin) plated or copper plated. Under no circumstances can you ever use copper tubing for hydraulic applications....It will work harden and crack".

Carroll Smith
(Nuts, Bolts, Fasteners & Plumbing handbook pg.207)

Stay away from stainless steel also....It sucks.

WTN
(unpublished except here) /ubbthreads/images/graemlins/grin.gif

Also.....Only silly people use silicon brake fluid.
tongue0015.gif
 
Gentlemen.... I concur.... steel it is, and not the stainless type...

By the way... Is the tubing set offered by Moss (wow $$$)copper plated??? I have a few odds and ends pieces that are a copper color...
 
jlaird.... Wow, nice site. I have my own bender and flairing jig so the cost will be less for me if I buy the tubing in bulk...

Thanks anyway, though.... /ubbthreads/images/graemlins/cheers.gif
 
Of course, if you can do it your self you can save some bucks for something else. Remember it takes the old fittings.
 
"bubble flair"!! Good excuse to spend money on Banjo's favorite Snap-On flare tool! /ubbthreads/images/graemlins/grin.gif

I've always used Bundy pipe and bent/flaired my own. Lots cheaper and usually I'm fussier than the li'l Tiawanese cottage industry fingers are. /ubbthreads/images/graemlins/devilgrin.gif
 
You check that site I posted Doc, all computer control bent.
 
Nice! Stainless exhaust tubing, custom bent... THAT has my attention! The Bundy pipe I'll stay with my bends: $$$ saved and ALMOST enuff for stainless exhaust for the ELAN!! /ubbthreads/images/graemlins/jester.gif
 
Smeartarse! I've actually UNCOVERED it! The MG is turned around in the drive (UNDER ITS OWN POWER!) and all's well with the world! The Elan is about to see daylight. ~GASP!~
 
[ QUOTE ]
/ubbthreads/images/graemlins/iagree.gif
"Use only genuine Bundyweld steel hydraulic tubing. Bundyweld comes in turn (tin) plated or copper plated. Under no circumstances can you ever use copper tubing for hydraulic applications....It will work harden and crack".



[/ QUOTE ]
/ubbthreads/images/graemlins/savewave.gif

But Copper alloy is just about all that is being sold for replacement?? /ubbthreads/images/graemlins/yesnod.gif-Maybe book is a bit out of date?.---Keoke
 
[ QUOTE ]
I've actually UNCOVERED it! The MG is turned around in the drive (UNDER ITS OWN POWER!) and all's well with the world! The Elan is about to see daylight. ~GASP!~

[/ QUOTE ]

<bows head> well Hallelujah!!!!! PICS! PICS! PICS!

(in a different thread of course... now that we've successfully hijacked another one) /ubbthreads/images/graemlins/smile.gif
 
It's apparently my purpose in life to be the Perfect Example of a bad example. The Elan ain't purty...

...and Carroll Smith is hardly one I'd call "out of date" there, Keoke. "Prepare to Win" and "Tune to Win" are TIMELESS. And oddly enough I purchased some STEEL Bundy just last week. Mebbe it was just NOS...
 
Nuts & Bolts was copywriten 1990.......

The MGA 1500 is about 30 years before that.

I generally don't consider any car stuff "new and improved" until it is a couple of decades tried & tested.

(House building materials have to pass the 100-150 year test.)
(And electronics about 6 months.)

I can't understand why I keep setting off Keoke's BS detector......... /ubbthreads/images/graemlins/grin.gif
 
[ QUOTE ]
...(And electronics about 6 months.)

I can't understand why I keep setting off Keoke's BS detector......... /ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

/ubbthreads/images/graemlins/lol.gif Your first bit answered the second. His detector is obsolete: Moore's Law by 1/3. /ubbthreads/images/graemlins/lol.gif
 
Back
Top