-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Brake & Clutch Master Cylinders
- Thread starter yelsink
- Start date
Share this page
Geo Hahn
Yoda
Offline
Mine (in place in the car) look the same length so if one is longer it is concealed within the M/C.
I guess I've never had both out at the same time to compare the lengths.
I would think you could assemble the M/Cs one way and see if they end up with the same amount revealed. If not, undo the circlips and swap them.
The other possibility is that someone has substituted a non-standard length push rod. Most likely train of thought there would be a longer one on the clutch in the mistaken notion that this would improve disengagement.
I guess I've never had both out at the same time to compare the lengths.
I would think you could assemble the M/Cs one way and see if they end up with the same amount revealed. If not, undo the circlips and swap them.
The other possibility is that someone has substituted a non-standard length push rod. Most likely train of thought there would be a longer one on the clutch in the mistaken notion that this would improve disengagement.