• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Brake and clutch pushrod

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
I'm having my Bugeye master cylinder resleeved to 3/4" at the last minute by Sierra Specialty. While going thru my spare parts, 4 pedal assemblies and all assorted parts, I noticed that I have 3 different length pushrods. I also noticed that I have a brake and clutch pedal that have different diameter pivot holes and a set of pedals that are different lengths, the clutch being 1/2" shorter. Since I going to use a Datsun 5 speed and disc brakes I'm having both sides of the MC sleeved 3/4". Thoughts?
Thanks, Rut
 
I'm having the exact same thing done. the pushrods are 3.5" long for both the clutch and brake. Can't help you on the pedals.
 
Back
Top