• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Brake and clutch pushrod

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
I'm having my Bugeye master cylinder resleeved to 3/4" at the last minute by Sierra Specialty. While going thru my spare parts, 4 pedal assemblies and all assorted parts, I noticed that I have 3 different length pushrods. I also noticed that I have a brake and clutch pedal that have different diameter pivot holes and a set of pedals that are different lengths, the clutch being 1/2" shorter. Since I going to use a Datsun 5 speed and disc brakes I'm having both sides of the MC sleeved 3/4". Thoughts?
Thanks, Rut
 
I'm having the exact same thing done. the pushrods are 3.5" long for both the clutch and brake. Can't help you on the pedals.
 
Back
Top