• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Brake and Clutch MC pushrod/pedal bolt stops?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
Are the bolt pedal stops still available or can a generic bolt setup of the correct size be used? On my TR3A it looks like a homemade setup and I'd like to get the stops positioned correctly.
 
On mine (and possibly yours) those bolts were not fitted (don't know the change point).

I added them to take up some slop in the pedal hole until the day when I get around to welding & re-drilling it. I just used some ordinary hardware:

StopBolts_zps2029b144.jpg
 
The change might have been around TS34312, Piggott notes "other minor changes to the Girling braking system", and TS39781LO didn't have them either. (I used the hole to mount a mechanical brake light switch.)

Even when they were fitted though, they were just ordinary bolts (HU0709) and thin "jam" nuts (JN2107).
 
Back
Top