-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Bouncy Fuel Gauge
- Thread starter Naomi
- Start date
Share this page
dklawson
Yoda
Offline
Jim K, I have absolutely no idea about whether or not the VW parts could be made to work. Sorry... I don't really know VWs that well. What you may want to consider is measuring the resistance of your fuel gauge and seeing if you can locate a VDO or AutoMeter fuel gauge that will work with that range. Those aftermarket gauges will have their own, internal voltage stabilizer.
However, (and this is a big however) the sender resistance on early, non-stabilized systems went from high ohms on Full to low ohms on Empty. The later sending units deliver high ohms for Empty and low ohms on Empty (opposite). I've never considered doing this... but I suppose you could open up an old sending unit and invert the tube around which the resistance wires are wound. This would make the sender work in a manner that's compatible with bimetallic gauges. However, you'd still need to buy a gauge that would work with the output range of the Smiths sender. Later Smiths gauges won't be set up to work with the resistance range of the early senders.
However, (and this is a big however) the sender resistance on early, non-stabilized systems went from high ohms on Full to low ohms on Empty. The later sending units deliver high ohms for Empty and low ohms on Empty (opposite). I've never considered doing this... but I suppose you could open up an old sending unit and invert the tube around which the resistance wires are wound. This would make the sender work in a manner that's compatible with bimetallic gauges. However, you'd still need to buy a gauge that would work with the output range of the Smiths sender. Later Smiths gauges won't be set up to work with the resistance range of the early senders.
