• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR2/3/3A Boot Lid Seal TR3A

Tinkerman

Darth Vader
Offline
The boot lid seal is split and came that way from TRF and I see how it goes on. The split slides on to a piece of metal that stands upright one the body in the boot lid area. I have been told to use contact cement to fasten the seals to the body. I have no problem, in general with that idea but, in this instance I in-vision a mess trying to use contact cement on the boot lid seal. So far my experience with contact cement is that once it touches it's stuck.
I would appreciate any ideas on how you did yours and what kind of cement you used.

Thanks, Tinkerman
 

Moseso

Jedi Knight
Country flag
Offline
3M Weatherstrip Adhesive (yellow gunk). Available in tubes, wherever auto parts are sold.
 

martx-5

Yoda
Country flag
Offline
It's also available in black.
 

vivdownunder

Jedi Warrior
Offline
Test fit the seal before you glue it down. Sometimes they sit too high and the boot lid won't close properly.

The solution is to carefully cut the slot in the rubber a bit deeper so it sits lower on the metal lip.

I fix it down with roof and gutter grade silicone. Squirt it into the slit and push the seal partially on. Close the boot lid while the silicone sets, and it just presses the seal down far enough so it's still in contact with the lid. That gives better water proofing.

With contact adhesive it's harder to adjust the boot seal to an even height as it grips where it first touches.

Regards,

Viv.
 

Geo Hahn

Yoda
Country flag
Offline
As I recall, I didn't even bother to glue it in. It just sits there and doesn't seem to want to leap out at me at anytime. Well shoot, can't hurt to try it and see if it stays in place w/o stickem. Sit! Stay!
 
OP
Tinkerman

Tinkerman

Darth Vader
Offline
I tried that Geo, but since it is cut in half at the bottom it wouldn't sit and stay!
Thanks for the info guys.

Tinkerman
 
OP
Tinkerman

Tinkerman

Darth Vader
Offline
I'm afraid Geo, that my boot seal has not been properly trained. I tried putting its end at the top and it jumped off every time. I guess I will have to use some sort of training stimulant.
 
Similar threads
Thread starter Title Forum Replies Date
B Fitting the Boot Lid Seal Austin Healey 8
Got_All_4 TR2/3/3A Is this the proper Boot lid seal? Triumph 9
J TR2/3/3A Boot lid seal. Triumph 3
Lin Boot Lid rubber seal Austin Healey 10
G Wanted Tr4a boot lid Triumph Classifieds 2
AUSMHLY Boot Lid Identification Austin Healey 2
chicken Boot Lid Badge Austin Healey 8
B TR6 Boot lid thread plates loose in stiffener Triumph 1
A BN2 Boot Lid Austin Healey 4
B Wanted I'm looking for a boot [trunk] lid and drivers rear fender for a 100/6 or 3000 Austin Healey Classifieds 0
H Wanted Braket that connects the boot lid to the boot lid stay strut on a Herald. Triumph Classifieds 0
toysrrus TR6 "how to un-lock a boot lid"??? Triumph 11
CLEAH Boot lid repair Austin Healey 2
Y TR6 Triumph TR6 Trunk Boot lid wanted Triumph 4
B Aluminium Bonnet and Boot Lid Austin Healey 6
brcree MGB Trunk lid..[boot] alignement MG 4
R 100-4 boot lid prop Austin Healey 2
PatGalvin TR2/3/3A Boot Lid Reinforcing Supports Question, TR3A Triumph 8
J BN1 Boot Lid Bracket Austin Healey 9
healeyblue Boot lid safety cable Austin Healey 10
angelfj1 TR2/3/3A TR3A - Boot Lid Handle Triumph 6
sundown boot lid Triumph 6
Jim_Newman Trunk/boot lid Austin Healey 9
PatGalvin Rusty Boot Lid Follies Triumph 24
K TR2/3/3A Fitting the TR3 Boot Lid Triumph 4
M BJ7 BOOT LID Austin Healey 6
G I need a Vermillion trunk [boot] lid. Spridgets 3
Tinkerman TR2/3/3A 3A Boot Lid Handle Triumph 4
wangdango adding aluminum to alloy boot lid? Restoration & Tools 0
King_of_England Mk 3 boot lid rubber replacemant... British Motor Corp 4
Lin Luggage Rack Boot Lid Shield Austin Healey 18
J Boot Lid Austin Healey 4
kyreb1862 Boot Lid Adjustment MG 1
Lin Austin Healey Script on Boot Lid Austin Healey 28
69MGC Any tips for fixing a bent boot lid MG 7
John_Mc Second boot lid Triumph 0
weewillie boot lid British Motor Corp 3
kyreb1862 Boot Lid Needs Adjusting MG 19
Ed_K Correct way to fasten the boot lid gasket ? Austin Healey 4
Cain Boot Lid/Bonnet Alignment Triumph 2
Cain TR6 Odd Problem - TR6 Boot Lid Triumph 1
A Adjusting boot lid position Spridgets 5
Editor_Reid Bugeye with a factory [?] boot lid Spridgets 7
Editor_Reid Bugeye with a factory [?] boot lid Austin Healey 1
mctriumph General TR Spring boot sale Umpteenth Annual Triumph 5
5 BJ7 Boot Rust-Through Austin Healey 13
angelfj1 TR2/3/3A TR3A Boot Millboard Install Triumph 7
JohnGone Wanted Q: Small Boot, Small Spare Tire? And, Jack needed. MG Classifieds 2
K TR2/3/3A boot drain troughs 59 tr3 Triumph 7
J Restoration Progress - Boot Installed Austin Healey 1

Similar threads

Top