• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Bonnet fitment

jlaird

Great Pumpkin
Country flag
Offline
How do you like that brit subject.

Used the wooden block trick to bind the center of the bonnet up, did not damage the paint.

Unbolted the drivers side hinge and opened the bonnet. With a friend.

I note that the hinge is indeed bent a bit, not a prob can fix that easly and even drill a few more holes for attaching the bonnet.

Would you beleive that the right radiator support is bent forward about a quarter of an inch or so and is keeping the bonnet from going all the way back. Have not discovers where on the radiator shroud that it is hitting yet but looks like I just may be able to make it fit properly.

Need to jack the front end so I can see with the bonnet down. Of course, I can only do this when I have help. But time is not a problem.

Had to come in and cool off, too darn hot to stay out there more than an hour at a time and I already did the yard today.

What I need is a good movie.
 
Back
Top