• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BN6 Soft Top Webbing

Share this page

OP
nevets

nevets

Jedi Knight
Country flag
Offline
I need to replace the two strips of webbing on my BN6 soft top because they were damaged by mice during winter storage. I'm unsure about how the webbing strips attach to the heavy front frame member (the part that gets mounted to the windshield). Anyone have any experience with this? Suggestions would be greatly appreciated.
 
Sort by date Sort by votes
Pretty sure they are between the wood and the softop fabric . They are wrapped over the top of the wood and stapled to it . Then covered by the softop fabric and frame to windshield seals etc
 
Upvote 0 Downvote
Thanks HN. Just so I am clear, will I need to remove all the screws from the underside of the frame member (visible in the attached picture) plus the two corner screws located on the upper side of the frame member? Arrow indicates point of insertion of the webbing.
soft top webbing.jpg
 
Upvote 0 Downvote
Back
Top