• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

bn6 drum brake front hubs

Share this page

maxwedge5281

maxwedge5281

Jedi Warrior
Offline
can the front hubs from a 1958 bn6 with drum brakes and steel wheels be used on a 1959 bn6 with disc brakes and healey bolt on wheels???
 
Don't think so. I believe the axle shaft size is different. You have to go a little deeper and change kingpin out as well. Ran into that when I put put disc brakes on my brothers 100/6.
Marv
 
Denis Welch &, AH Spares sell the adapter plates for mounting calipers on the older-style swivel axles. You can get them in the wider bolt pattern to fit the later Type 16 Girlings, 4-piston Girlings or 4-piston Toyota calipers.
The Moss catalog makes it look like the kingpin is the same throughout. My BJ8 swivel axles fit onto my BN6 kingpins no problem.

The main thing would be acquiring disc rotor-compatible disc wheel hubs from BT7/BN7 onward.

I believe there's an older post in the archives where Randy discusses what he went through for the conversion.
 
Back
Top