• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

BN4 Interior Assembly - Unidentified Holes Purpose

Share this page

Csarneson

Csarneson

Jedi Hopeful
Country flag
Offline
282F9088-4ECD-482E-9E93-F982ADD4A303.jpeg


I’m about to cover these holes across the back of the cockpit with vinyl. They have armacord on the back side. What attaches here?
 
Don't know if mine is OEM or a PO's efforts but I have them on my BT7 and they have pop rivets from the boot side thru the top edge of the armacord, presumably as belt/suspenders approach in addition to the glue for the top of the armacord.
 
Thanks so much! That makes so much sense. For now I will cover them up then. If the armacord needs suspenders lately then I will address that then.
 
Back
Top