Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am a new member and new to restoration. I am learning as I go. I am trying to remove the "steering set pins" from the back plate and can get all but the one closest to the bumper on each wheel. I have tried PB blaster,kroil,heat,and wax. I don't want to snap the bolts and it doesn't look like you get get new ones. Any suggestions Thanks
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
BN1 Front suspension
- Thread starter Dogs4
- Start date
Share this page
Offline
Often a little heat & some Kroil will help. You may have to apply the Kroil for several days in a row to get results. It takes time for it to work into the joint. The other way would be to use an impact wrench. Should be able to borrow or rent one. If you don't have a hefty air supply, the electric impact wrenches work pretty well. I've been using a Black & Decker "Bulldawg" for years.
D
D