-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
BN1 Crown Wheel and Pinion
- Thread starter zblu
- Start date
Share this page
No they are not. The spiral bevel axle of the BN1 100 is completely different from the later cars' hypoid unit.
If you are looking for a stock replacement ratio or any number of alternate ratios, Denis Welch Motorsport seems to have a large variety. Look in the 100S section. Click HERE
If you are looking for a stock replacement ratio or any number of alternate ratios, Denis Welch Motorsport seems to have a large variety. Look in the 100S section. Click HERE