• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Blasted Fulcrum Cotter Pin!

Share this page

jhorton3

jhorton3

Jedi Warrior
Country flag
Offline
Major swear words given to the fulcrum cotter pins! I've used a file and a belt sander to try and whittle it down, but I'm no where close to having it drop down far enough to put the nut on the threads. Has anyone ever been able to use one out of the box without modification?
 
I never had trouble getting them to fit, but I've heard of plenty of people that have.
 
The right side pin is now ruined. I took too much off, so now I get to order a new one. Left side went right in without any modifications or problem.
 
I found that it wasn't so much the new pin as the hole in the bottom of the king pin. I found that the grinder set that fits the dremel which is made to sharpen chain saws fits in that hole very nicely and cleans it up enough to slide the pin in. Be careful as you will find it only takes about one pass. You can get this at Home Depot for a couple of bucks.

Mark
 
Back
Top